58
9. Care and maintenance
For all work on the grinding machine, the locally applicable safety and
accident prevention regulations as well as instructions in the “Safety”
and “Important Notes” section of the operating instructions must be
observed.
CAUTION
9.1 Coolant
The coolant must be changed and the water tray
must be cleaned every week.
The water tray must always be filled with water
up to 5 cm below the rim. The water tray can be
pulled out in front for filling and cleaning.
9.1.1 Coolant additive
Do not add any coolant additives to the coolant.
ATTENTION
Do not allow the laser to come into contact
with oil mist. Therefore, do not use any
coolant additives.
9.2 Cleaning the grinding machine
After grinding and / or dressing work, the grinding machine must be cleaned with a moist rag or a
wet vacuum cleaner. Rub acid-free oil into the grinding machine. Clean the window with window
cleaning agent.
ATTENTION
Do not spray-wash the grinding machine with
water. This can damage the machine.
Figure 9-1
Water tray
2
1
2
