33
Figure 7-4
Mounting the holder plate
1
2
3
7.2.2 Clamping the knife
Close the safety doors (3-2/8).
Move holder plate to change position by pressing the “F5 Change Position” button (3-9/11) on
the touch panel.
Open the safety doors.
Push back the threaded nut (7-3/1) as shown in
the figure.
ATTENTION
Grease the thread, since it will be damaged
otherwise.
Only use knife that matches the holder plate
(compare labels). Using an incorrect holder
plate can damage the knife and the machine.
Place the holder plate (7-4/1) on the holding
flange (7-4/2).
Pay attention to the centering pin (7-3/2) and
centering hole (7-4/3) in the holder plate.
Turn the threaded nut (7-3/1) on the holder plate.
7. Operation
Figure 7-3
Threaded nut
1
2
