52
1
Switch on all lamps
2
Lock / unlock safety doors (only possible if a safety door locking mechanism exists!)
3
Switch machine lamp On / Off
4
Switch coolant pump On / Off
5
Move grinding wheels to dressing position
6
Switch rear grinding wheel On / Off
7
Switch front grinding wheel On / Off
8
“F1 General” (current screen)
9
“F2 Front Grinding Wheel”: see Chapter 8.5.2
10
“F3 Rear Grinding Wheel”: see Chapter 8.5.3
11
“F4 Serration Unit”: see Chapter 8.5.4
12
“F4 Polishing Unit”: see Chapter 8.5.5
13
“F10 Save”: For saving changes
14
“F11 Mode”
15
“F12 Back”: For going back to the previous screen
8.5.2 Front grinding wheel
1
Switch front grinding wheel drive On / Off
2
Forward / backward movement angle
adjustment
3
Release / lock angle adjustment clamp
4
Release / block motor angle adjustment
8.5.3 Rear grinding wheel
1
Switch rear grinding wheel drive On / Off
2
Forward / backward movement angle
adjustment
3
Release / lock angle adjustment clamp
4
Release / block motor angle adjustment
8. Control system
Figure 8-16
“Front grinding wheel” manual
functions
Figure 8-17
“Rear grinding wheel” manual
functions
1
1
3
2
2
4
4
3
