24
Installation and initial startup
AZURA® Detector DAD 6.1L, DAD 2.1L, MWD 2.1L Instructions, V6700
4.8.6 Remote control
On the rear panel of the detectors an electrical connector socket is
loca ted which serves to send or receive signals from other instruments.
For example start signals from an injection valve or an autosampler can
be put to the START input. All voltages have to be mounted between
GROUND and the corresponding event.
Electronic defect
Electrostatic discharge can destroy the electronics.
Wear a protective bracelet against electrostatic discharge and ground.
For test purposes or in some other cases, it can make sense to manually
enter these signals.
sending control signals (Events) to external devices
opening and closing contacts
activating 500 ms pulses
The following remote signals can be received and sent:
for receiving start, control, and error signals from external devices
for sending start, control and error signals to external devices
Fig. 19
Relation between display and terminal strip
