Key Management Systems Ltd
31
|
P a g e
Lock Controller
Lock output
energised when LED
is lit
O
M
RO
N
G
6
E
-1
34
P
-ST
-US
12
V
D
C
Lo
ck
02200009
1
2
3
4
5
6
7
8
En De
K
M
S
B
U
S
DOOR
RTE
N/C
AUX1
AUX3
AUX2
N/O
COM
A
B
S2M - LED
M2S - LED
Default Lock Mode
En= Energised/Fail safe
De= De-energised/Fail secure
Set via micro switch
1
2
3
4
5
6
7
8
Note:
Due to space considerations on the PCB, terminations are
labelled 1 through to 8.
Lock Controllers are designed to control a single door only. Two outputs are provided by means
of a powered output to supply up to 2 Amps @12v DC to a lock directly and also a volt free SPDT
(Single Pole Double Throw) relay to interface with other equipment. This has a maximum current
rating of 2 Amps @12v DC. The relay has been designed to follow the powered output and
cannot be programmed independently.
The Lock Controller features the same auxiliary inputs as the System Controller, these are listed
on the following page.
The Lock Controller features BUS Communication LEDs. These are to be used as a guide to the
M2S and S2M signals.
Note:
Earlier versions of the Lock Controller have alternative wiring
configurations, contact KMS Technical Support for more
information.
