22
EN
G
L
ISH
M2-4 Weekend prog.
Weekend timer
Allows for enabling the weekend programme
Start 1st weekend
Switch-on time first weekend programme
Stop 1st weekend
Switch-off time first weekend programme
Start 2nd weekend
Switch-on time second weekend programme
Stop 2nd weekend
Switch-off time second weekend programme
M2-5 Exit
Exit the programmable thermostat
M3 – LANGUAGE
Ita
Italian
Eng
English
Fre
French
Deu
German
M4 – STAND-BY
Stand-by
Enable STAND-BY automatic switch-off
M5 – BUZZER
Buzzer
Enable acoustic signal in case of alarm.
M6 – FIRST LOADING
First loading
Perform brazier pre-loading after emptying the tank
M7 – STOVE STATUS
Stove status
Verification of the stove's current status
Screw feed time on
Time out
Thermostat state
Flue gas temperature
Flue gas extractor speed
M8 – TECHNICAL
CALIBRATIONS
Access key
Menu reserved for Technical Assistance Centre
M9 – EXIT
Exit
Exit from the user menu.
1. Menu M1
– SET CLOCK
Allows for setting the current date and time.
2. Menu M2
– SET TIMER
Sub-menu M2
– 1 – ENABLE TIMER
Allows for globally enabling and disabling all programmable thermostat functions.
Sub-menu M2
– 2 – DAILY PROGRAMME
Allows for enabling, disabling and setting the daily programmable thermostat functions.
Two operating time slots can be set according to the following table, where OFF signals the clock to ignore
the command:
DAILY PROGRAMME
MENU LEVEL
SELECTION
MEANING
POSSIBLE VALUES
M2-2 Daily prog.
Daily timer
Enable daily programming
ON – OFF
Start 1st day
Switch-on time first daily programme
Time – OFF
Stop 1st day
Switch-off time first daily programme
Time – OFF
Start 2nd day
Switch-on time second daily programme
Time – OFF
Stop 2nd day
Switch-off time second daily programme
Time – OFF
Sub-menu M2
– 3 – WEEKLY PROGRAMME
Allows for enabling, disabling and setting the weekly programmable thermostat functions.
The weekly programmer has 4 independent programmes, the end effect of which combines the 4 individual
settings.
The weekly programmer can be completely activated or deactivated by setting ON or OFF respectively in the
menu shown in the table below:
MENU LEVEL
SELECTION
MEANING
POSSIBLE VALUES
M2-3 Weekly prog.
Weekly timer
Enable weekly programming
ON – OFF
