KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | [email protected] | www.klinger.dk
Side 20
Ultrasonic Level Meter
Operation Manual
你
the focus of convex lens, it will receive all the false echoes. Therefore, the
sensor shall not be installed in the middle of the arch tank top.
Installation on nipple joint – arch tank top
Installation on flange – arch tank top
For most arch tanks, the length of connecting pipe plus flange on the top
is 150-180mm. But the part below the probe thread of ultrasonic level meter is
not so long (elongated probe is available for customization to make sure the
probe emitting surface is below the connecting pipe bottom). In this case, the
proportional relation between the diameter and length of connecting pipe shall
be noted.
