DOCUMENTATION OF AUTOMATIC CONTROL
FOR COMPACT UNITS
DTR.MCKT-HPX.
AUT-009.5.0
PAGE
GDYNIA
MCKT-HPX
2016
6/35
KLIMOR Spółka z ograniczon
ą
odpowiedzialno
ś
ci
ą
, 81-035 Gdynia, ul. B. Krzywoustego 5
Fax: (+48 58) 783-98-88; Tel.: (+48 58) 783-99-99
Service – Fax: (+48 58) 783-98-88; Tel.: (+48 58) 783-99-50/51 Mobile: (+48) 510 098 081
Information provided in this document is subject to change
email:
– Office
– Service
3.
CONTROL PANEL
The main component designed for communication with the controller of the control system is the control panel (it is
also possible to control the equipment with the BMS in the MODBUS RTU protocol).
Picture 3
Control panel view
3.1
Assembly and connection of control panel
The DEN16-C panel is energized with 12VDC supply from the Unibox controller. The power supply and control is
carried out both using 4-strand communication cable. It can be terminated at each side with RJ11 connectors (4-pin,
size 6) or can be connected directly to COM1 clamp connection. The cable with RJ connectors should be interlaced
as shown:
Picture 4
RJ clamp terminal view
If cables longer than 5 meters are used, it is recommended to use twisted-pair cables, eg. UTP
(1st pair: +12V, G0; 2nd pair: A, B).
Picture 5
Panel diameters
