DOCUMENTATION OF AUTOMATIC CONTROL
FOR COMPACT UNITS
DTR.MCKT-HPX.
AUT-009.5.0
PAGE
GDYNIA
MCKT-HPX
2016
10/35
KLIMOR Spółka z ograniczon
ą
odpowiedzialno
ś
ci
ą
, 81-035 Gdynia, ul. B. Krzywoustego 5
Fax: (+48 58) 783-98-88; Tel.: (+48 58) 783-99-99
Service – Fax: (+48 58) 783-98-88; Tel.: (+48 58) 783-99-50/51 Mobile: (+48) 510 098 081
Information provided in this document is subject to change
email:
– Office
– Service
6.1.3 MAIN MENU
6.1.3.1 OPERATION MODE
[TRYB]
– this parameter enables choosing a required operation mode:
{MANUAL}
– operation in manual mode, all operating parameters set by the operator
{MAX}
– turning on operation for FW time, preset fan speed at MAX level, once preset time elapses, switching
back to operation in the previously selected mode
{1d}
– operation in automatic mode – specific settings for each weekday
{2d+5d}
– operation in automatic mode – separate settings for MO–FR and separate ones for SA–SU
{7d}
– operation in automatic mode – common settings for MO–SU
Settings of MANUAL mode
This screen enables setting preset fans speed and temperature in the MANUAL mode:
[N]
– setting the air supply fan control value
[W]
– setting the air exhaust fan control value
[Tzad]
– temperature requested in MANUAL mode
Settings of ZONE mode
These screens enable setting operating AHU parameters in the ZONE mode:
[DN]
– selection of weekday, which zones will be programmed
{MO, TU, … , SU}
– setting for selected weekday of the 1d schedule
{5d}
– settings for MO–FR of the 2d+5d schedule
{2d}
– settings for SA–SU of the 2d+5d schedule
{7d}
– settings for MO–SU of the 7d schedule
///Ust.STR.1
DN=dd
T=__°C
N=__% W=__%
Kon.Str.=__
FS=____
//ZONE setting
Zone1 ►
Zone2 ►
Zone3 ►
Zone4 ►
\\MANUAL setting
N=__% W=__%
Tzad=__°C
/OPERATION MODE
MODE=MANUAL
MANUAL setting ►
ZONE setting ►
MAX setting ►
MAIN MENU
Operation mode ►
Input ►
Outputs ►
Settings ►
Adv.Settings ►
Alarms ►
Passwords ►
Info ►
Time/Language ►
Revert settings►
