KLIM Alpride E1 Aspect 16, User Manual

Page: 12 / 114

USER MANUAL / ENGLISH 12
HOW TO INSTALL THE DETACHABLE AIRBAG SYSTEM
STORAGE, CLEANING & SERVICE LIFE
STORAGE
Store your KLIM ALPRIDE® E1 AIRBAG SYSTEM in a cool, dry environment. For safety reasons, keep the backpack out of the reach of
children. Alpride® SA and KLIM USA shall not be liable for any damages and losses due to improper storage.
CLEANING
Use only water (no cleaning products!) to clean the backpack. Ensure that the entire product is drybefore storage and before using
it again to avoid the risk of icing. In case of a dirty inflator, the inflator system must be cleaned properly with a damp soft microfiber
towel. KLIM USA shall not be liable for any damages and losses due to improper cleaning.
DISPOSAL
Dispose of the product in domestic waste. Do not mechanically disrupt or incinerate the product. This may lead
to potential hazards.
Electrical appliance:
•
Never dispose of electrical appliance in your household waste.
• Return electrical appliance using the recycling facilities provided.
• Contact your local refuse disposal authority for more details.
AA/LR6 1.5 V Batteries:
•
Never dispose of batteries in your household waste.
• They may contain toxic heavy metals and are subject to hazardous waste regulations.
• The chemical symbols of the heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead.
•
Only dispose of batteries when they are fully discharged.
• Before disposing of the appliance it is essential to first remove the batteries.
• Return batteries using the recycling facilities provided.
• Contact your local refuse disposal authority for more details.
SERVICE LIFE
The product has a limited life time and should be replaced in case of signs of mechanical wear. It is recommended to regularly control
your gear and to replace it at least every five years after first use. The functioning could be reduced due to mechanical wear or
improper use. Dispose of the product if you notice any damage. The KLIM ALPRIDE® E1 AIRBAG SYSTEM is designed to withstand 50
inflations.
1 2
Put the trigger handle through the velcro slot and insert
it in the shoulder strap pocket. Pass the airbag through
the two holes to the air bag compartment.
Open the air bag compartment zipper about
1.2 inches (3cm) to the end.
3
Close the compressor compartment cover
and attach the hooks.
Fold the air bag.
Attach the trigger handle.
4
(3cm)
1.2 inches