CANX3-KIT
Installation and Operation Manual
PG 30/44
REV: A (9/4/2020)
8.9.4.
#H11, H12, H13, H15 & H16, attach Air Compressor Bracket below Rack Support Tubes
in same fashion, as performed during Air Tank installation (
). Leave fasteners slightly loose, to
enable Bracket to be re-positioned, as needed.
Figure 20
–
Installing Air Compressor Bracket, Exploded View
8.9.5.
Temporarily install Air Compressor onto Bracket by inserting Compressor Bolts through Brass Sleeves
(i.e., front to back). Ensure Compressor is pushed rearward; use a nut if necessary to hold in place.
Figure 21
–
Air Compressor positioned temporarily in place (Shown installed on CARB Vehicle)
FRONT
FRONT
Insert Front to Back
H13
H11 (3)
Re-Use
H12
Sleeve*
Foot*
H15 (4)
H16
X3-101
Use Later
