If this product is to be connected to a new or upgraded electrical installation, then it must
be connected to the supply by a supply cord fitted with:
−
an appropriately rated plug that is compatible with the socket-outlet fitted to the final
subcircuit in the fixed wiring that supplies this cooking range; or
−
an appropriately rated installation male connector that is compatible with the
installation
female connector fitted to the final sub-circuit in the fixed wiring that supplies this
cooking
range.
Before connecting to the mains, make sure that:
The supply system is regularly earthed, according to the regulations in force.
The isolation switch can easily be reached after the appliance is installed.
After connection to the mains, check that the supply cable does not overheat.
Never use reductions, shunts, adaptors that can cause overheating or burning.
The manufacture shall not liable for any direct or indirect damage caused by faulty
installation. The installer must ensure that the product installation and connection
complies with the local and general gas and electrical regulation in force.
Before using the electric oven, we suggest to:
Remove the special film covering the oven door glass (if there is any)
Heat the empty oven at max. temperature for 45 minutes. This is to remove any
unpleasant smell caused by working residues.
Carefully clean the internal cavity of the oven with soapy water and rinse it.
IMPORTANT!
When the oven is in operation, hot surfaces might occur at the oven door. Take note of the
“Warning! Hot Surface” sign. Make sure children do not go near the oven when it is in
use.
Oven Accessories
Model : OFS9020
1x baking tray
1x baking tray holder
1x grill insert
1x baking tray handle
2x full rack
1x user manual
1x warranty card
Page 11
V 2.0
