KKT KSC 215-L-U/S, Installing Instruction

Page: 6 / 39

Installing Instruction Installing Instruction Installing Instruction Installing Instruction
Healthcare chiller of the KSC Series
Healthcare chiller of the KSC Series Healthcare chiller of the KSC Series
Healthcare chiller of the KSC Series
Version „Revision 0 Version „Revision 0 Version „Revision 0 Version „Revision 05 5 5 5” ” ” ”
Type KSC 215 Type KSC 215 Type KSC 215 Type KSC 215----L LL L----U/S U/S U/S U/S
page page page page 6 6 6 6von von von von39 39 39 39
U:\KSC 215 L\03_Dokumente\Installationsanleitung\KKT_chillers_Installing_Instruction_engl_Vers05.doc
After filling, check all connections for leakage.
4. With the pump turned off, fill the system to a static water pressure of 1.5 bar
(21.75 psi) by Avanto an Chiller at the same level. (Also see Table 1 page24)
(Also see Table 1 page24) (Also see Table 1 page24)
(Also see Table 1 page24)
5. The cooling block operates completely independently of the MR system.
6. Voltage is still present in the KSC control cabinet when the MR system is turned
off. Risk of death!
Risk of death! Risk of death!
Risk of death!
7. Even with the cooling block turned off, high surface temperatures can cause
burns. Risk of death!
Risk of death! Risk of death!
Risk of death!
Only trained and qualified personnel are permitted to install, start up, and repair the
cooling block.