KKT KSC 215-L-U/S, Installing Instruction

Page: 10 / 39

Installing Instruction Installing Instruction Installing Instruction Installing Instruction
Healthcare chiller of the KSC Series
Healthcare chiller of the KSC Series Healthcare chiller of the KSC Series
Healthcare chiller of the KSC Series
Version „Revision 0 Version „Revision 0 Version „Revision 0 Version „Revision 05 5 5 5” ” ” ”
Type KSC 215 Type KSC 215 Type KSC 215 Type KSC 215----L LL L----U/S U/S U/S U/S
page page page page 10 10 10 10von von von von39 39 39 39
U:\KSC 215 L\03_Dokumente\Installationsanleitung\KKT_chillers_Installing_Instruction_engl_Vers05.doc
III. Transport r III. Transport r III. Transport r III. Transport route/transport oute/transport oute/transport oute/transport
a) Transport measurements a) Transport measurements a) Transport measurements a) Transport measurements
Length: approx. 3,200 mm (126 inches)
Width: approx. 1,100mm (43.3 inches)
Height: approx. 2,150mm (approx. 84.65 inches)
You also need to add the height of the transport equipment, such as pallets, lift truck,
transport rollers, etc.
b) Transport weight b) Transport weight b) Transport weight b) Transport weight
Weight: approx. 1,600 kg (approx. 3,528 lbs.)
c) Transport safety locks c) Transport safety locks c) Transport safety locks c) Transport safety locks
There are no transport safety locks to remove.
d) Crane transport d) Crane transport d) Crane transport d) Crane transport
If a crane will be used to transport the chiller, note the following:
Lift the chiller only from its base. Insert two steel rods through the holes in the base.
The rods must be specifically designed for this purpose and able to support the weight
(1,100 kg./2,425 lbs.).
Secure the rods with locking pins to prevent shifting.
Use only straps or rope for lifting from the rods.
The straps or ropes must be held in place with a frame to keep them from pressing into
the side walls, gutters, and condenser body. (Refer to the following graphic).