KKT KSC 215-L-U/S, Installing Instruction

Page: 28 / 39

Installing Instruction Installing Instruction Installing Instruction Installing Instruction
Healthcare chiller of the KSC Series
Healthcare chiller of the KSC Series Healthcare chiller of the KSC Series
Healthcare chiller of the KSC Series
Version „Revision 0 Version „Revision 0 Version „Revision 0 Version „Revision 05 5 5 5” ” ” ”
Type KSC 215 Type KSC 215 Type KSC 215 Type KSC 215----L LL L----U/S U/S U/S U/S
page page page page 28 28 28 28von von von von39 39 39 39
U:\KSC 215 L\03_Dokumente\Installationsanleitung\KKT_chillers_Installing_Instruction_engl_Vers05.doc
6. Without MR, the IFP is set to Bypass (open magnet valves with no current). In this
operating state, there is only approx. 3 m³/h (13.2 gal/min) of coolant in
circulation.
VIII. SPS Settings VIII. SPS Settings VIII. SPS Settings VIII. SPS Settings
Setting the clock on the operation panel OP73
Remark: The function of the button F1, F2. F3 and F4 will shown above the buttons at
the screen.
The following steps are to be used:
1. Switch on the main switch 5Q1
2.
Now the chiller is running in autarc.
3.
If the date and time displayed are incorrect, change them using the following
steps.
4.
If the display shows any failure please press back till the display looks like figure
2
Abbildung Abbildung Abbildung Abbildung 2 2 2 2 figure 2 figure 2 figure 2 figure 2
5. Than press „F4“.