3-6
n
Built-In Single and Double Wall Oven
ELECTRONIC CONTROL DIAGNOSTIC MODE AND COMPONENT TESTING
Failure/Error Codes
The following two pages contain information about
error codes and what to look for when you
encounter a specific condition. This information
is a portion of the information that is in the
Tech Sheet, but provides a more direct picture
of the repair. Always reference the Tech Sheet
when diagnosing error codes. Follow all safety
warnings
EŽŝƐƉůĂLJʹŽŶƚƌŽůŝƐďůĂŶŬ
^ƵƐƉĞĐƚĞĚŽŵƉŽŶĞŶƚʹ dŚĞƌŵĂů&ƵƐĞ͕ƉƉůŝĂŶĐĞDĂŶĂŐĞƌ͕hƐĞƌ/ŶƚĞƌĨĂĐĞ
ŚĞĐŬůŽǁǀŽůƚĂŐĞƐĂƐƐŚŽǁŶŝŶĚŝĂŐƌĂŵ
ƌƌŽƌŽĚĞ&ϭϬ
^ƵƐƉĞĐƚĞĚŽŵƉŽŶĞŶƚʹhƐĞƌ/ŶƚĞƌĨĂĐĞ
ƌƌŽƌŽĚĞ&ϮϬ͕&Ϯϭ
^ƵƐƉĞĐƚĞĚŽŵƉŽŶĞŶƚƐͲ<ĞLJƉĂĚ
ƌƌŽƌŽĚĞ&ϯϬ
^ƵƐƉĞĐƚĞĚŽŵƉŽŶĞŶƚƐʹhƉƉĞƌKǀĞŶ^ĞŶƐŽƌ
ƌƌŽƌŽĚĞ&ϯϭ
^ƵƐƉĞĐƚĞĚŽŵƉŽŶĞŶƚʹ>ŽǁĞƌKǀĞŶ^ĞŶƐŽƌ
ƌƌŽƌŽĚĞ&ϯϯ
^ƵƐƉĞĐƚĞĚŽŵƉŽŶĞŶƚƐʹDĞĂƚWƌŽďĞ:ĂĐŬŽƌDĞĂƚWƌŽďĞ
ƌƌŽƌŽĚĞ&ϭϭ
^ƵƐƉĞĐƚĞĚŽŵƉŽŶĞŶƚʹƉƉůŝĂŶĐĞDĂŶĂŐĞƌ
When measuring resistance, always
disconnect power.
When measuring live voltage, complete the
following steps:
1. Disconnect power.
2. Connect voltage measurement
equipment to proper connectors.
3. Reconnect power and confirm voltage.
4. Disconnect power and reassemble all
parts and panels before operating.