KitchenAid KOCE500ESS Technical Education Download Page 43

Page: 43 / 52

COMPONENT ACCESS

Built-In Single and Double Wall Ovens

4-9

REMOVING THE DOOR LATCH AND OVEN

LIGHT SWITCH ASSEMBLY

Open the oven door to expose the vent trim

located below the Control Panel.

Remove four mounting screws and remove the

vent.

Locate and remove two Latch Assembly mounting

screws at the front of the assembly.

Push the Latch Assembly back and up to release it

from a mounting tab at the back.

Once removed from the tab, pull the assembly out

the front.

Must clear mounting tab

Picture shown with the Appliance Manager

mounting support removed for clarity

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Failure to do so can result in death or

electrical shock.

Replace all parts and panels before operating.

Summary of Contents for KOCE500ESS





















































Search results

Summary of Contents for KOCE500ESS

Reviews:

Related manuals for KOCE500ESS

Brands by name

Popular brands

KitchenAid KOCE500ESS, Technical Education

Search results

Summary of Contents for KOCE500ESS

Reviews:

Related manuals for KOCE500ESS

Brands by name

Popular brands