4-20
10. Lay a covering on the floor in front of the
dryer, large enough to protect the front of
the dryer.
11. Remove the two screws from the door
handle, and remove the handle.
12. Tape the dryer door closed.
13. Tip the dryer onto its front.
14. Remove the four T-20 screws from the duct
support bracket and slide the bracket off
the duct.
Duct Support
Bracket
Bracket Screws
15. Remove the six T-20 screws from the rear
support panel (see the top right photo).
16. Remove the left screw and loosen the right
screw on the upper cover plate, then rotate
the plate so you can access the screws
that are under it. Tighten the cover screw
to hold it in place.
17. Remove the two 3/16
˝
Allen trunnion screws
from the rear of the drum, and remove the
metal washer and nylon spacer.
Cover Plate & Screws
Cover Plate
Trunnion Screws
Spacer
Washer
6 Rear Support Panel Screws
Pulley
Belt
18.
To remove the belt from the drum:
a) Pull the belt off the pulley.
Summary of Contents for KHEV01RSS - Pro Line Plus Electric Dryer
Page 112: ......
