8
| USING THE BLENDER
USING THE BLENDER
Before first use
Before using your Blender for the first
time, wipe the blender base with a warm,
damp cloth, then wipe clean with a
damp cloth� Dry with a soft cloth� Wash
the blender jar, lid, Flex Edge tamper,
and ingredient-measuring cap in warm,
sudsy water (see the “Care and cleaning”
section)� Rinse parts and wipe dry�
1
Before using the Blender, be sure
the countertop beneath the Blender
and surrounding areas are dry and
clean� Then, plug the Blender into
an earthed outlet�
2
The main power switch is on the back
of the blender base� Flip the POWER
switch to
I
(
On)� The status indicator
light above the (Start/Stop) toggle
button will begin to flash, indicating
that the Blender is in Standby mode�
The Blender is now ready to operate�
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
PREPARING THE BLENDER FOR USE
W11382110A.indb 8
6/24/2019 7:27:28 PM
