ENGLISH
CARE AND CLEANING
|
11
CARE AND CLEANING
CLEANING THE BLENDER AND ACCESSORIES
1
To clean the blender base and cord:
Unplug the Blender before cleaning�
Wipe the base and the cord with a
warm, damp cloth; wipe clean with a
damp cloth, and dry with a soft cloth�
2
Make sure to clean the blender jar,
lid, and ingredient-measuring cap
after each use� Remove any remaining
contents from the blender jar using a
spatula and pre-rinse it with hot water�
Fill jar with 700 mL of hot water and
add 3-4 drops of liquid detergent�
Place the lid on the blender jar, and
make sure the blender jar is fully in
place on the blender base�
Clean the Blender thoroughly after every use�
NOTE:
To avoid damaging the Blender, do not immerse the blender base
or cord in water� To avoid scratching the Blender, do not use abrasive cleansers
or scouring pads�
W11382110A.indb 11
6/24/2019 7:27:29 PM
