5-7
LOWER OVEN COMPONENTS
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
WARNING
Refer to page 4-24 for the procedure for ac-
cessing the door latch assembly.
1. Unplug oven or disconnect power.
2. Set the ohmmeter to the R x 1K scale.
3. Touch the ohmmeter test leads to the wire
connectors. The meter should indicate as
shown below
:
Latch Switch:
(BU) and (TN). The meter
should indicate an open circuit (infinite)
with door unlocked, and a closed circuit
(0
Ω
) with the door locked.
Door Switch:
(OR) and (BR). The meter
should indicate an open circuit (infinite)
with door unlocked, and a closed circuit
(0
Ω
) with the door locked.
Latch Motor:
(YL) and the neutral (WH)
stud on the AC terminal block. The meter
should indicate approximately 2450
Ω
.
DOOR LATCH ASSEMBLY
Latch Motor
Latch Switch
Door Switch
BR
OR
YL WH
TN
BU
