4-8
9. Bend and break the two front tabs on the
top air duct latch assembly cover.
10. Using a pair of side-cutters, cut the two
front joins on the top air duct latch assembly
cover, then bend the top and bottom covers
up as far as they will go.
Cut Here
Top Latch Assembly Cover
Top Air Duct
8. Remove the three screws from the appli
-
ance manager mounting bracket and slide
back to expose top air duct latch cover.
11. Remove the two screws from the door latch
assembly, pull the latch assembly back to
remove the latches from the cutouts, and
then lift and pull it forward so that you can
access the wiring.
Door Latch
Assembly Screws
12. Disconnect the wires from the assembly
as follows:
Latch motor = yellow & white
Door switch = brown (C) & orange (N.O.)
Latch switch = tan (C) & blue (N.O.)
Latch Motor
Latch Switch
Door Switch
BR
OR
YL
WH
TN
BU
Screw
Screw
Screw
