4-25
Air Vent Screws
13. Bend and break the two front tabs on the
top air duct latch assembly cover.
14. Using a pair of side-cutters, cut the two
front joints on the top air duct latch assem
-
bly cover, then bend the top and bottom
covers up as far as they will go.
Cut Here
Top Latch Assembly Cover
Top Air Duct
8. Remove the twelve screws from the upper
rear cover of the oven and remove the
cover.
Upper Rear Cover
(12 Screws)
9. Remove the four screws from both sides
of the oven.
Side Screws
2 of 4 Screws)
10. Remove the four screws from the lower
oven air vent and remove the vent.
11. Set the control subpanel assembly in its
place on the front of the oven and hold it
in place so it does not fall.
NOTE:
You will need something approximately
6-8
˝
long to prop up the front of the upper oven
in step 12.
NOTE:
You may want to remove upper oven
door to lighten the upper oven when lifting in
step 12.
12. Lift the front of the upper oven and securely
prop it up so that you can access the lower
door latch assembly.
Top Latch Assembly Cover
Continued on the next page.
