background image

19

ONE YEAR  LIMITED WARRANTY

For one year from the date of purchase, when this grill is operated and maintained according to instructions attached to or
furnished with the product, KitchenAid will pay for factory specified parts and repair labor to correct defects in materials or
workmanship. Service must be provided by a KitchenAid designated service company. 

SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON PARTS

In the second through fifth years from the date of purchase when this grill is operated and maintained according to
instructions attached to or furnished with the product, KitchenAid will pay for factory specified parts to correct defects in
materials or workmanship.

LIFETIME LIMITED WARRANTY ON STAINLESS STEEL COMPONENTS

For the life of the product, when this grill is operated and maintained according to instructions attached to or furnished with
the product, KitchenAid will pay for replacement of the stainless steel body housing due to defective materials or
workmanship. For the life of the product, when this grill is operated and maintained according to instructions attached to or
furnished with the product, KitchenAid will pay for replacement parts for the stainless steel grill burners. 

ITEMS KITCHENAID WILL NOT PAY FOR

1.

Service calls to correct the installation of your grill, to instruct you how to use your grill, to replace or repair house fuses
or to correct house wiring or plumbing.

2.

Damages to the finish, such as scratches or discoloration that may occur during normal use.

3.

Repairs when your major appliance is used for other than normal, single-family household use.

4.

Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in
accordance with electrical or plumbing codes, or use of products not approved by KitchenAid.

5.

Conversion kit or service call for the conversion of your gas grill from natural gas to L.P./propane or from L.P./propane to
natural gas.

6.

Replacement parts or repair labor costs for units operated outside the United States.

7.

Pickup and delivery. This grill is designed to be repaired in the home.

8.

Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9.

Expenses for travel and transportation for product service in remote locations.

10.

The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in
accordance with published installation instructions.

11.

Any labor costs after the first year.

12.

Damage resulting from normal wear and tear of your gas grill.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED
HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. KITCHENAID SHALL NOT BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO
STATE.

Outside the 50 United States, this warranty does not apply. Contact your authorized KitchenAid dealer to determine if another
warranty applies. 

If you need service, first see the “Troubleshooting” section of the Use & Care Guide. After checking “Troubleshooting,”
additional help can be found by checking the “Assistance or Service” section or by calling KitchenAid. In the U.S.A., 
call 

1-800-422-1230.

KITCHENAID

®

GAS GRILL WARRANTY

Summary of Contents for Architect KBGS274SSS0





















Reviews: