KisanKraft
®
Shoulder Mounted Baffle Type Reaper
KK-SBC-4502, KK-SBC-3804
: www.kisankraft.com
: +91.80.22178200
Page 26 of 32
Storage
Aged fuel is one of major causes of engine starting failure. Before storing the unit, empty
the fuel tank and run the engine until it uses all the fuel left in the fuel line and the
carburetor. Store the unit indoor taking necessary measures for rust prevention.
Transportation
1.
When hand-carrying the product, cover over the cutting part if necessary, lift up the
product and carry it paying attention to the blade.
2.
Never transport the product over rough roads over long distances by vehicle without
removing all fuel from the fuel tank. If doing so, fuel might leak from the tank during
transport.
Troubleshooting
Case 1. Starting failure
Check
Probable cause
Action to be taken
Fuel tank
Incorrect fuel
Drain it and with correct fuel
Fuel filter
Fuel filter is clogged
Clean the fuel filter
Carburetor
adjustment screw
Out of normal range
Adjust to normal range
Sparking (no spark)
Spark plug is fouled/wet
Clean/dry the spark plug
Plug gap is incorrect
Correct (GAP: 0.6~0.7mm)
Spark plug
Disconnected
Retighten the spark plug
Case 2. Engine starts but does not keep running/Hard re-starting:
Check
Probable cause
Action to be taken
Fuel tank
Incorrect fuel or
staled fuel
Drain it and with correct fuel
Carburetor adjustment screw
Out of normal range
Adjust to normal range
Muffler, cylinder (exhaust port)
Carbon is built-up
Wipe away
KisanKraft
®
Shoulder Mounted Baffle Type Reaper
KK-SBC-4502, KK-SBC-3804
: www.kisankraft.com
: +91.80.22178200
Page 7 of 32
Before Getting Started
Before using the machine for the first time be sure to read through this manual in order to
avoid wrong operation. Please preserve this manual properly so that it can provide you with
information whenever necessary.
Symbols on the Machine
For safe operation and maintenance, symbols are carved in relief on the machine.
According to these indications, please be careful not to make a mistake.
Warning Labels on the Machine
Warning / Attention
Danger: Risk of fire or
explosion
Read the
instruction manual
completely and
carefully before
using the tool.
Top speed of trimmer head
is 6600 min
-1
Wear head, eye
and ear protection.
Top speed of blade is 7100
min
-1
Wear protective
gloves.
The port to refuel the "MIX
FUEL"
Wear safety
footwear
The guaranteed noise level
Danger: Toughing
the rotating blade is
forbidden.
With this symbol the
manufacturer confirms that
this tool is in accordance
with applicable European
directives.
