Pole Pruner/ Palm Harvester
KK-PP2-8627/ KK-PH2-215
: www.kisankraft.com
: +91.80.22178200
Page 20 of 56
WARNING
! To quickly detach the pole saw from
the shoulder strap, pull the quick-release latch tab
upward.
Controls
1. Throttle trigger lockout
2. Throttle
3. Slide control
Starting
Press down the trigger lockout lever and squeeze the throttle trigger.
Hold them in that position.
Move the slide control to START and hold it there.
Now release the throttle trigger, slide control and trigger lockout in that order.
This is the starting throttle position.
Set the choke knob (4):
If the engine is cold and
for warm start
–
also
use this position if the engine has been running but is still cold.
Press the fuel pump bulb (5) at least five times
–
even if the bulb is already filled
with fuel.
Starting method 1:
Remove the blade scabbard.
Check that the chain is not
touching the ground or any other
obstacles.
Place the unit on the ground: It
must rest securely on the engine
support and the hook. If
necessary, rest the hook on a
raised support (e.g. a branch,
mound or something.
Make sure you have a safe and
secure footing.
Hold the unit with your left hand
on the fan housing and press it
down firmly
–
your thumb should
be under the fan housing.
Check that nobody is standing within the working range of the machine.
Do not stand or kneel on the drive tube. This will bend the drive tube and may result
in permanent
