KisanKraft
®
Petrol Engine (4-Stroke)
KK-PE4-165
: +91.80.
22178200
Page 15 of 20
NOTE:
Fuel can damage paint and plastics. Be careful when refueling. Damage caused by
spilling fuel is not covered under warranty.
MAINTENANCE
Do periodic maintenance to keep the engine in good condition. Always follow the
inspection and maintenance recommendation and schedules given in this manual.
WARNING
:
Stop the engine before doing any maintenance work. If the engine must be operated,
provide adequate ventilation. Breathing in exhaust can cause loss of consciousness and
even lead to death.
Everyday Maintenance:
1.
Air cleaner
: A dirty air cleaner will restrict air flow into the carburetor. To prevent
carburetor malfunction, service the air cleaner regularly. Service more frequently
when operating the generator in extremely dusty areas.
Check air cleaner core, get rid of fouling, and keep the core clean.
Check bolts, fasten the loose ones.
Check whether lubricant oil level is within the limits.
2.
Clean the core after 25hrs of engine run
3.
Clean carbon fouling of the spark plug after working up to 50hrs. Check the
clearance, and adjust the gap to 0.6-0.7mm (see figure 4-1). Check radiator, and
clean fouling among radiators.
Drain the oil while the engine is warm to assure rapid and complete
draining.
Remove the drain plug and sealing washer, remove the oil filler cap, and
drain the oil.
Reinstall the drain plug and sealing washer. Tighten the plug securely.
Refill with the recommended oil and check the oil level.
(1) Dismantle Spark Plug
(2) Adjust Clearance
4.
Clean the fuel tank and filter when working time reaches 100hrs: Remove the fuel
cover, drop out filter, and wash it with brush slightly. Remove fuel tank, clean the
