KisanKraft
®
Petrol Engine (4-Stroke)
KK-PE4-165
: +91.80.
22178200
Page 16 of 20
fouling and water inside fuel tank. Reinstall fuel tank, place filter from fill-in hole,
filling the clean fuel to red line level.
1)
Drain plug
2)
Engine switch
3)
Lower level
Check aging of fuel pipe every 2 years. If ageing, hardening and cracking is detected,
have it replaced. Tighten the joints, and check leakage.
Before storing the unit for an extended period:
1.
Make sure the storage area is free of excessive humidity and dust.
2.
Service according to the table below.
Storage Time
Recommended Service Procedure To Prevent Hard Starting
Less than 1 month
No preparation required
1 to 2 months
Fill with fresh gasoline and add gasoline conditioner
2 months to 1 year
Fill with fresh gasoline and add gasoline conditioner
Drain the carburetor float bowl
Drain the fuel sediment cup
T
ROUBLESHOOTING
1.
The Engine Can’t Startup
Have the engine checked if it is hard to or cannot be started.
Firstly, check the fuel level of the fuel tank. Turn fuel valve to (2), Fuel should
flow from the drain when the fuel valve is turned ON. Tighten the drain plug.
(Refer to starting of the engine)
2.
Spark Plug
Check the spark plug. Remove the spark plug cap and clean any dirt around it. If the
engine still cannot be started after repeating several times, please see the authorized
dealer. Users are not allowed to dismantle or reassemble the unit by themselves.
3.
Not Enough Power
Check the air-cleaners. Please refer the maintenance inspection book to clear
the air-cleaner.
Check the fuel. Please strain out the gasoline in fuel tank and in carburetor, and
fill in new gasoline.
For any other trouble, please contact our dealer.
