36
Figure 24: EVATION – LAS EVApoTranspiratION software.
4.4.2 Installing Modified Algorithms
Depending on the configuration of the
LAS-
system, the user may have to install an additional modified
algorithm, which is required for the data processing to fluxes. EVATION is equipped with a default
algorithm, specially designed for the
LAS-BET
/
LAS-RET
systems. Depending on the requested
LAS
-system and the supplied sensors this algorithm has been modified based on a compromise of
calculating reliable fluxes and user friendliness. Note that the output of the EVATION software (i.e.
calculation of the sensible heat flux
H
and/or latent heat flux
L
v
E
) is depending on the
LAS
-system
configuration.
Figure 25: Depending on the LAS-ET (RF) configuration the standard or modified algorithm is selected.
The installation of additional modified algorithms is done separately and is done only after successful
installation of the EVATION software. Modified algorithms can be found on separately delivered CD
Summary of Contents for LAS
