Kipor IG6000, Service Manual

Page: 22 / 38

18
（
4
）
Install the air cleaner element in the air cleaner case.
Caution
Do not operation the engine without an air filter element or with a damaged air filter. Rapid engine wear
will result
3.5 Spark plug inspection and adjustment:
（
1
）
Remove the spark plug cap and remove the spark plug with plug sleeve
（
2
）
Remove carbon on the electrodes of spark plug with a wiey brush and check sealing washer for
damage.
（
3
）
Check the resistance value of spark plug and replace if the resistance value is not within the
stated value.
Resistance value of
spark plug
3~9KΩ
（
4
）
Measure the plug gap with a wire-type feeler gauge. If the gap is not compatible with the standard,
adjust by bending the side electrode.
Spark plug gap .028-.034 in. (0.7~0.8 mm)
Standard spark plug F7RTC
0.7-0.8
（
5
）
Install the plug and tighten securely after adjustment.