Kioti Daedong EX35C, Manual

Page: 59 / 229

4
-8
COMBINATION SWITCH
(1) Head light switch
(A) OFF
(B) Low beam ON
(C) High beam ON
OFF : Head light and tail light OFF
: Low beam and tail light ON
: High beam and tail light ON
: Turn signal light and tail light ON
: Head light OFF and tail light ON
H11O405A
H23O407A
The combination switch consists of the
head light, turn signal light, and horn
switches. Its function by its position is
as follows:
HEAD LIGHT SWITCH
The head light switch can be operated
only while the key switch is turned to
the “ON” position. Turning the head light
switch clockwise one click will illumi-
nate the low beam head lights while
turning it one more click will illuminate
the high beam head lights.
WARNING
!!!!!
Driving with high beam head
light disturbs the approaching
vehicle’s visibility for safe
driving. Use the high beam head
lights only if necessary.
H11O405A
H23O406A
(1) Turn signal light switch
(2) Head light switch
(3) Horn switch
Stop the engine immediately if
the oil pressure warning lamp
does not go off after the engine
is started.
The engine may be
severely damaged.
If the battery charge warning
lamp does not go off after the
engine is started, check the elec-
trical systems, such as the
alternator, for damage. Continu-
ing to use the engine under this
condition can discharge the bat-
tery or damage other electrical
devices.
!!!!!
CAUTION
The ignition key is not directional
and can be inserted in any
direction. Also, be careful not to
leave the tractor unattended as the
same key is used for all KIOTI
tractors. It can be stolen.
The horn, turn signal lamp, and
hazard lamp can be operated with-
out the key inserted.
NOTE