7
-10
EX35(C)/EX40(C)/EX45(C)/EX50(C)
H11O608A
4. Pull out the oil dipstick, clean it, and
then insert it into its original position.
Then, pull it out again and check if
the fuel level is within the specified
range.
5. If the oil level is too low, add some
new oil so that the level is within the
allowable range. (Refer to “Lubrica-
tion” in the chapter “Service”.)
(1) Oil Dipstick
(A) Upper Limit
(B) Lower Limit
1. Check the engine oil daily.
2. Park the tractor on a level ground and
lower the implement.
3. If the engine was just running, wait
for approx. 5 seconds before check-
ing the oil level.
To avoid personal injury:
Be sure to stop the engine be-
fore checking the oil level.
!!!!!
CAUTION
If oil level is low, do not run en-
gine.
Never add the oil over the up-
per limit.
IMPORTANT
H11O607A
CHECKING ENGINE OIL
LEVEL(E)
(1) Oil Inlet Plug
(2) Gauge
(A) Oil Level is Acceptable Within This Range
Summary of Contents for Daedong EX35C
