Kioti Daedong EX35C, Manual

Page: 162 / 229

6
-15
3-POINT HITCH IMPLEMENT OPERATION
6
If the boom or bucket is not
operating, properly, lower the
bucket onto the ground, stop
the engine, and reduce all hy-
draulic pressure. Then, check
all the hydraulic connections
and connect them again.
Before connecting or discon-
necting the hydraulic hose cou-
pling for the loader, lower the
boom onto the ground, stop the
engine, and move the joystick
lever front and back, left and
right for several times to remove
residual pressure in the hydrau-
lic hose.
IMPORTANT
WARNING
!!!!!
To avoid accidents:
Pressurized diesel fuel or hy-
draulic fluid may be sprayed on
your skin or eyes, leading to a
severe injury or even death.
To check leakage, use a board
and wear protective gloves and
goggles.
If your eyes come into contact
with the hydraulic fluid, see
your doctor immediately.
Never try to disconnect the tube
and quick coupler while the
tractor and implement are in
operation. Release the pressure
by operating the lever after the
engine is stopped.
NOTE
The hoses and couplers for instal-
lation are supplied with the
loader.
JOYSTICK VALVE
H11O531A
A1:Boom Up
A2:Bucket Up(Roll Back)
B1:Boom Down
B2:Bucket Down(Dump)
WARNING
!!!!!
Do not leave the tractor with the
boom off the ground in any
circumstances. If it is neces-
sary, lock the joystick.
When the joystick lever is not
in use, lock it since the imple-
ment can fall down if the lever
is operated accidently.