manualshive.com logo in svg

Kioti CK25, Manual, Page: 50 / 128

Share
Download
Kioti CK25 Manual Download Page 50

OPERATION  5-13

(2) TRAVEL ADJUSTMENT

Pull out the position adjust lever and slide
the seat backward or forward, as required.
The seat will lock in position when the
lever is released.

IMPORTANT

After adjusting the operator’s seat,
be sure to check that the seat is
properly locked.

704O519B

(1) Seat Belt

Adjust the seat belt for proper fit and con-
nect to the buckle. The seat belt is auto-
locking retractable type.

(3) SEAT BELT

CAUTION

To avoid personal injury:

Always use your seat belt when the
ROPS is installed.
Do not use the seat belt if your trac-
tor is not equipped with a ROPS or
when it is removed.

The seat installed on your tractor has a
comprehensive range of adjustments.
Before prorating the tractor, it is impor-
tant to adjust the seat to the comfortable
position.

1.The lever which control the seat posi-

tion (up or down) in accordance with
operator’s. Use the lever when you
change the seat position.

2. When you change the seat position

(front or rear), pull the lever up and
push or pull seat to front or rear
direction.

3. When you change the suspension of

the seat, you can adjust the suspen-
sion of the seat using the lever. Pull
the lever front direction and move the
lever left or right.

CAUTION

For one seated occupant.
Do not adjust seat when vehicle is
in operation.
Keep clear of maintenance should
be carried out by authorized & com-
petent personnel only.

Summary of Contents for CK25

































































































































Reviews:

No comments