10-16 CK25/30
IMPORTANT
To prevent serious damage to the
hydraulic system, use only a
genuine KIOTI filter.
(1) HST Oil Filter
6. After the new filter is in place , fill the
transmission up with oil to the upper
line of the oil gauge.
7. After running the engine for a few
minutes, stop it and check the oil level
again, add oil to the prescribed level.
8. Make sure that the transmission fluid
doesn’t leak through the seal.
9. HST model has both tranmission filters.
(1) Oil Filling Plug
(2) Gauge
(A) Oil level is Acceptable Within this Range.
(1) Hydraulic Oil Filter
3. Remove the oil filter.
4. Place a film of clean transmission fluid
of the rubber seal of the new filter.
5. Tighten the filter firmly until it contacts
the mounting surface. Then tighten the
filter, by hand, an additional half turn
only.
704OA28A
704OA29A
HST Type
704OA30B
Summary of Contents for CK25
