Kinze 3600, Operator'S Manual

Page: 202 / 382

MAINTENANCE
9-32 Rev. 3/05
ELECTRICAL CONTROL CONSOLE SCHEMATIC
IMPORTANT: Before doing any electrical work, disconnect the control console from the tractor battery. Keep
wiring harnesses away from high temperature areas or sharp edges. DO NOT route the wiring harnesses along
battery cables. Use tie straps to keep wire harness away from moving parts on tractor and planter. Be sure ground
connections to the tractor frame are clean to provide good electrical contact.
NOTE:
1. Operating marker or point row switch in either direction lights panel light.
2. Point row clutch switch operates independently of the rest of the control box.
3. Power to the marker switch is fed through the auxiliary switch and the two transport
function switches. Operating any of the switches in the lower row disables the marker
function and turns off the panel light. (If the point row clutch switch is in the “off”
position.)
See page 9-37 for electrical control console schematic and wiring harness
to two-speed point row clutch solenoids for planter equipped with the
optional Two-Speed Point Row Clutch Package.
Pin “H” BLUE (Left Marker)
Pin “O” RED (Right Marker)
Main Fuse (15A)
Indicator Light
Marker Switch
Raise/Wing
Lock Switch
Pin “F” YELLOW/RED
Pin “V” BLUE/BLACK
(Raise To Transport)
Pin “A” ORANGE/RED
(Tongue Raise)
Pin “C” BLACK/RED (Ground) Pin “T” BLACK (Ground)
BLACK (- 12 VDC)
RED (+ 12 VDC)
Pin “B” BLUE/RED (Rotate)
Pin “W” ORANGE/BLACK (Auxiliary)
Pin “R” BROWN (Left Point Row Clutch)
Pin “G” ORANGE (Right Point Row Clutch)
Delay Action Fuse (10A)
Point Row Clutch
Switch
Auxiliary Switch
Rotate/Tongue Switch
MAIN
FUSE
15A
USE 10 AMP
DELAY
ACTION
ONLY
POINT ROW
OFF
LEFT
ON
OFF
AUXILIARY
ROTATE
TONGUE
OFF
RIGHT
LEFT
MARKER
OFF
WING LOCK
RAISE
MARKERS WILL NOT FUNCTION WITH AUXILIARY SWITCH ON
RIGHT
®
(INS238)
(PLTR82a)