Kinze 3600, Operator'S Manual

Page: 204 / 382

MAINTENANCE
9-34
ELECTRICAL WIRING HARNESS SCHEMATIC
(On Planter)
Pin “W” ORANGE/BLACK
(Auxiliary)
Ports V5 & V6
Pin “T” BLACK (Ground)(12 Gauge) Pin “V” BLUE/BLACK
(Raise To Transport)
Port V16
Pin “O” RED (Right Marker)
Port V1
Pin “S” YELLOW
(Left Two-Speed Clutch)*
Pin “U” RED/BLACK
(Right Two-Speed Clutch)*
Pin “H” BLUE (Left Marker)
Port V2
Pin “G” ORANGE
(Right Point Row Clutch)
Pin “R” BROWN
(Left Point Row Clutch)
Pin “F” YELLOW/RED
(Wing Lock)
Ports V3 & V4
Pin “L” GREEN (“C” MONITOR DATA) Pin “M” BLACK (“B” MONITOR GROUND)(14 Gauge) Pin “K” WHITE (“A” M12V)
VALVE
BLOCK -
Located On
Hitch
Pin “B” (Rotate)
BLUE/RED
Ports V9 & V12
Pin “A” (Tongue)
ORANGE/RED
Ports V10, V13 & V14
Pin “C” (Ground)
BLACK/RED
23 Pin Capacity
VALVE BLOCK -
Located On Rear
Center Frame
Clutch Solenoid
Terminals On L.H.
Side Of Planter
BLUE - NOT USED
BLACK - To
Ground Clamp
Clutch Solenoid
Terminals On R.H.
Side Of Planter
(ELC13/ELC12/TWL71)
BLUE
RED
* See page 9-37 if equipped
with the optional Two-Speed
Point Row Clutch Package.
Rev. 9/02
STYLE A With Contact Connectors -
See page 9-35 for STYLE B with fork
terminals.
STYLE A With Contact
Connectors - See page
9-36 for STYLE B with
fork terminals.
NOTE: STYLE A With
Fork Terminals And
Contact Connectors
Shown - STYLE B Will
Have Fork
Terminals Only