31
•
The breaker can work at any angle as long as the pressure always follows
along the tool axis (see the following application examples):
Correct use
Incorrect use
NOTICE
If the force of the excavator arm on the breaker is too low or too high,
undesired vibrations will occur on the breaker.
To ensure the attachment or the excavator arm do not get damaged, the
correct pressure of the excavator must be determined and maintained during
use.
•
Do not use the hydraulic breaker and the tool as a lever or for demolition!
Incorrect use
Incorrect use
•
Do not use in a single location for longer than 30 seconds without
penetrating the material, since this can lead to overheating and damage to
the point!
In this case, chose another location to the side or look for a weak point in
the material like a crack!
•
Do not use the tool for lifting loads!
Incorrect use
Summary of Contents for AUGERTORQUE SB Series
Page 50: ...50 NOTES ...
Page 51: ...51 NOTES ...
