19
2.2.
Intended use
The
SB - hydraulic breaker
is designed for use on the excavator with an
operating weight of
0.5 – 12 t
and is mounted onto the carrier machine using
the quick coupler or direct attachment.
It is operated and controlled via the hydraulic circuit of the carrier machine.
NOTICE
The
operating weights
of the carrier machines and attachments must be
adapted to each other (see chapter
Technical data
).
NOTICE
All uses other than those listed in chapter
Intended use
are misuse and can
lead to hazardous situations, operational interruptions, and to voiding the
warranty.
•
The breaker is used to smash different types of materials (e.g. stone,
concrete, asphalt, earth, etc.).
•
The maximum permissible back pressure is 2.5 MPa (25 bar).
•
The breaker works with a system for energy recovery that utilises the
inertia of pressurised gas to make high-impact performance and low
stress on the excavator arm possible.
•
The breaker is also equipped with a system that prevents the effects of
blank firing on the structure of the attachment.
2.3.
Restrictions
NOTICE
All instructions and safety guidelines of the manufacturer must be
observed.
Other regional safety and environmental protection regulations must be
observed.
WARNING
All uses other than or in excess of those described in the
Proper intended
use chapter
are considered misuse of the attachment and can lead to
hazardous situations, operating faults and voiding of the warranty!
The manufacturer shall not accept and liability for resulting personal or
property damage!
Summary of Contents for AUGERTORQUE SB Series
Page 50: ...50 NOTES ...
Page 51: ...51 NOTES ...
