Jaco® assistive robot User guide
26
Environment
Ambient temperature
-20°C to 70°C
Light rainfall
a limited period of time (IPX2)
General
Normal atmospheric pressure conditions
Ambient temperature
0°C to 50°C
Storage
Maximum relative humidity
55%
Electrical
Voltage
24 VDC
0.09A max
Power Ratings
Current consumption
0.5A fused
Water resistance
limited period of time (IPX2)
General
Light rainfall
minimal exposure to rain
Do not submerge device under water
Do not expose device to water with moving force
Warnings
If the device is dropped, hit, or endures any damage, the water
resistance may be affected
Installation guidelines
Following the general guidelines ensures successful installation of the control system components.
Mounting
The display comes equipped with industrial Velcro™ installed on the back of the device. Peel off
the protective plastic and stick the Velcro™ to the desired surface. For optimal mounting, use the
Kinova display holder (Part number: AM 1241 0001).
Position
The display should be installed in a proper position so that the user can see the screen and feedback
lights clearly from his normal position in the wheelchair.
Make sure that the device is not blocking the user’s view of critical areas.
Make sure that the device or mounting system does the interfere with the wheelchair controls.
Cables
Cables should be mounted in a way to prevent damage to the cables or safety hazard for the user.
Make sure they do not interfere with motion of the wheelchair or any of its components and
accessories.
Do not overtighten the tie wraps as this could result in cable damage.
+1 514-277-3777
kinovarobotics.com
© 2021 Kinova inc. All rights reserved.
Summary of Contents for JACO
Page 1: ...Jaco assistive robot User guide ...
Page 4: ......
