FP 25/30/50 D / FP 10/20/3050 A
Issue: 04/2011
56
Every 2 weeks
Component
What is to do?
ceramics roller
Remove the ceramics rollers and then remove the dirt in the
holes by using air pressure. Clean the ceramics roller with a
alcohol moisturized cloth.
Every 3 months
Component
What is to do?
film break sensor
Clean the film break sensor with a soft cloth.
main drive motor / fan Blow out the dust with pressurized air.
guide rollers
Clean the guide rollers and roller shafts with alcohol.
spool shafts
Lubricate with Esso universal oil.
Every 6 months
Component
What is to do?
shutter /
shutter housing
Clean the shutter housing with pressurized air.
Clean shutter edges with a soft toothbrush.
lens turret (if existing)
Clean the coding plates and the sensors on the sensor board
with a Q-tip moisturized with Isopropyl or Isopropanol.
ATTENTION
Do not blow with pressurized air into the rotor - particles can be blown into the rotor and
block the rotation.
