FP 25/30/50 D / FP 10/20/30/50 A
Safety Instructions
Issue: 04/2011
5
1 .3 .2 Lamphouse Hazards
1 .3 .2 .1 Broken Glass
In cold condition the xenon lamp has an inner pressure of about 8 to 10 bar (145 psi)
and in hot condition of about 30 bar (435 psi). When a xenon lamp bursts, broken glass
can cause suffer injury to face, eyes and arteries. Therefore it is absolutely necessary to
wear protection with open lamphouse.
DANGER OF ExPLOSION
S
Never bypass a door switch.
S
Only work on open lamphouse and with xenon bulb with face protection (shield),
neck protection and safety gloves which reach to the elbow.
If the xenon lamp explodes you can suffer injury to face, eyes and arteries.
S
Dispose of the xenon bulb: Before removing xenon lamp put protective cover
around it, pack xenon bulb in original package and give it back to your supplier.
S
Only insert the new xenon bulb in protective cover. Remove cover after mounting
the xenon bulb.
1 .3 .2 .2 uv Radiation
WARNING uv RADIATION
S
Operate projector with a closed lamphouse only.
S
Use UV radiation eye and skin protection during adjustment of the lamp and conver-
gence.
S
If you do some adjustments with an open lamphouse (look through visual hole), you
have to use visual protection which blocks the ultraviolet radiation.
Never look into light of a xenon lamp without protective glasses!
1 .3 .2 .3 High voltage
DANGER
Ignite xenon lamp in closed lamphouse only.
1 .3 .3 Mechanical Danger
DANGER
S
Do not work around the machine with long loose hair, or loose clothing such as
scarves or ties, they may get trapped in the drive mechanism and pull you in.
S
Only open shutter housing when projector is standing still with power disconnected.
If the projector is running with covers open be careful and do not touch the rotating
shutter or other moving parts. Serious cuts can result.
S
Do not put your fingers between the film track and film pressure skate or between
sprockets and pad shoes.
