The Image Series and Wall-O-Lite share a similar control interface. The
DMX Image 80 is pictured below as an example. Image series and Wall-
Lites have 2 modes of operation. In Fixture Mode one address controls 8
lamps. In Individual Lamp Mode each lamp has a unique DMX address.
G
F
E
D
A
C
B
A)
Manual Selector Dial:
Turns lamps on and off manually without connecting
DMX Cable to Fixture.
Note:
DMX overrides all manual controls
B)
DMX Address:
Sets DMX Address of Fixture.
C)
Individual Lamp / Fixture Switch
: Converts between INDIVIDUAL LAMP
and FIXTURE methods of DMX control.
D)
DMX-In & DMX-Out:
DMX-In receives DMX signals from Dimmer Board
and DMX-Out relays DMX signal through to other Fixtures or Instruments.
E)
DMX TERMINATE Switch
: Terminates DMX signal at the end of Fixture
series.
F)
Power Switch:
Has a built-in indicator light, which can detect if AC power is
present in power cord.
"O" = OFF position.
G)
Fuse:
Provides circuit protection.
Note: If Fuse is "blown" or "open" replace
with same type of fuse rating as marked.
5
The light level of one or more fixtures can be adjusted by turning
lamps off and on in a progressive outside in pattern.
Summary of Contents for DMX-ONE
Page 1: ...Operation Manual DMX ONÉ ...
