MULTI-FLO CONTROL SETTINGS
To
simultaneously
chase same lamp
position in one or more Multi-Flos:
•
Set all Multi-Flo addresses to
“001”
•
Turn on power switch.
10
Set the DMX TERMINATE switch on the LAST
unit to
“I” CLOSE
. The preceding units in the
daisy chain must have the switch set to
“O”
Open
.
DMX-ONÉ CONNECTIONS
(A)
Plug in 5 pin XLR DMX cable into DMX
output plug and connect to a fixture’s
DMX Input plug.
(B)
Plug in power cable to DMX-ONÉ AC
power input. (100-240 VAC, 50-60Hz)
DMX ONÉ SETTINGS
(A)
Turn on power switch.
(B)
Set RATE/DIM switch to
DIM
and
turn MASTER up to
max.
(C)
Set NUMBER OF CHANNELS to
“012”
(D)
Set RATE/DIM switch to
RATE
.
(E)
The MASTER knob controls the
rate of chase. Same lamp position
will chase on and off from channel
1 through 12 in one or more Multi-
Flos.
Summary of Contents for DMX-ONE
Page 1: ...Operation Manual DMX ONÉ ...
