07
1400-
1700mm
600-
1100mm (2
0)
800-
1400mm (3
0)
5. Attach the roof rails to the four fixing
plates using the bolts provided
This roof kit may be used to secure directly
through tile or slate surfaces.
To convert this roof kit to meet with MCS012
compliance, please use
‘bolt down seals’ (KSK0315)
available separately.
1. Locate the rafters beneath the
roof material and drill to a depth
of 120mm with a 12mm drill bit
3. Locate the nut above the rubber
roof seal and tighten to ensure a good
seal is made on the fixing surface
2. Insert the rawl plug provided if
necessary and fix the bolt with a spanner
4. Stabilise the flat fixing plate by tightening
the attached nuts above and below the plate
KSK0220 - 400 Bolt Down Roof Kit
