15
In any solar panel system, the ‘return’ refers to the intake in the collector where liquid is
returning to be reheated. The ‘flow’ refers to the collector side where the liquid is flowing to
the heat exchanger.
Note: It is essential that the collector temperature sensor is located in the flow of the collector.
The following illustration shows the connections to the manifold.
1. Tighten compression fitting to connection fitting (flow and return)
2. Tighten compression fitting to pipe work (flow and return)
3. Attach assembled fittings to manifold
4. Push clip all the way down until connection is fully retained
5. Pull gently on assembly to ensure proper engagement and retention
Connection Information
Return connection
Flow connection
Male assembly
Sensor pocket
Female assembly
Manifold clip
Manual airvent
