5
FIGURE 3
BRICK PANEL INSTALLATION
1.
Insert side Brick panel into place,
using Brick retaining clip position and
screw to top of firebox.
2.
Install rear Brick panel, brick
retaining clip located at top.
NOTE!
For Log, Crushed Rock and Glowing
Ember installation refer to PAGE
16.
FACING MATERIAL INSTALLATION
Facing material. Example DRYWALL
may be installed flush with top of
Fireplace.
Side facing to be installed to
standoffs only.
FIGURE 4
FIGURE 5
SIDE FLUE INSTALLATION
NOTE!
This UNIT is not
Load Bearing.
REAR FLUE INSTALLATION
NOTE!
This UNIT is not
Load Bearing.
SIDE BRICK
PANEL
REAR BRICK
PANEL
NOTE!
This UNIT is not
Load Bearing.
DRYWALL
BRICK
CLIP
