Log T
abs
Step (1)
If using the MVF40 chassis, omit this step (go to step 2). If using
MDV30 or MDV38, break glowing embers into thumbnail size and place
along the perimeter of the burner
. Do not place on middle burner (as illus-
trated). Care should be taken not to block burner ports.
Step (2)
T
ake Log #4 and place onto burner using the two log tabs
(located on burner pan) as a guide.
Log Pin
Log Pin
Step (3)
T
ake Log #1 and place onto burner using the two log tabs
(located on burner pan) as a guide.
17
LOGF38
PLACEMENT
GUIDELINES
