MQRB4436 / MQRB5143 / MQRB6961 Nailing Tab Guide
The Nailing Tabs on the MQRB4436, MQRB5143 or MQRB6961 can be used in two ways:
1/2” Drywall Flush with Face of Fireplace
–Fireplace and
Combustible Wall to be covered with Non-Combustible
Materials (e.g. Tile around Fireplace).
Note:
If using Optional Surround, Maximum Thickness for
Non-Combustible Material is 3/4”.
Framing Flush with Face of Fireplace
-Fireplace to be covered
with Non-Combustibles (e.g. Concrete Board) for
Flat Wall
appearance.
Note:
If using Optional Surround, Maximum Thickness for Non-
Combustible Material is 3/4”.
[Qty] 2 Nailing Tabs are
located on each corner of the
fireplace.
Steel Framing Stud
If Combustible (Wood) Framing
Studs are used, they must be
Rotated to allow Min.1”
Clearance from Airbox.
[Steel Stud Framing Shown.]
Steel Framing Stud
If Combustible (Wood) Framing
Studs are used, they must be
Rotated to allow Min.1”
Clearance from Airbox.
Steel Framing Stud
If Combustible (Wood) Framing
Studs are used, they must be
Rotated to allow Min.1”
Clearance from Airbox.
Steel Framing Stud
If Combustible (Wood) Framing
Studs are used, they must be
Rotated to allow Min.1”
Clearance from Airbox.
1” Min Clearance Around All Sides of Airbox
11
