EN
23
EN
In
more
detail...
NMHT18-Li
Troubleshooting
5. Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10 °C and 30 °C.
6. We recommend using the original package for storage or covering the product
with a suitable cloth or enclosure to protect it against dust.
Transportation
1. Switch the product off remove the battery pack.
2. Attach the blade cover (11) onto the cutting device (blade) (1).
3. Always carry the product by its handles (4, 6).
4. Protect the product from any heavy impact or strong vibrations which may
occur during transportation in vehicles.
5. Secure the product to prevent it from slipping or falling over.
Troubleshooting
Therefore check the product using this section. In most cases the problem can
be solved quickly.
WARNING!
All further inspection, maintenance and repair work must be performed
Problem
Possible cause
Solution
1. Product does
not start
1.1 Battery pack is not
properly attached
1.1 Attach properly
1.2 Battery pack is
discharged
1.2 Remove and charge
battery pack
1.3 Battery pack is damaged 1.3 Check by a specialist
electrician
1.4 Other electrical defect to
the product
1.4 Check by a specialist
electrician
2. Product does
not reach full
power
2.1 Battery pack capacity is
too low
2.1 Charge battery pack
2.2 Air vents are blocked
2.2 Clean the air vents
3. Unsatisfactory
cutting result
3.1 Blade is worn / damaged 3.1 Replace with a new one
3.2 Thickness of branches
exceeds capacity
3.2 Only cut branches
complying with the
capacity
MNL_NMHT18-Li_18V 50cm Hedge Trimmer_V1_210913.indd 23
9/13/21 1:10 PM
